2007 Safety and Security Reporting Manual

Example 1 — Completing the Safety and Security Setup form (S&S-10)
Example 2 — Enumerating Security Personnel
Example 3 — Security Configuration Reporting
Example 4 — Allocating Security Personnel among Modes
Example 5 — Fatality
Example 6 — Two or More Injuries Reporting
Example 7 — Calculating Total Property Damage
Example 8 — Evacuation
Example 9 — Collision at Grade Crossing Reporting
Example 10 — Latitude and Longitude
Example 11 — Incident Categorization
Example 12 — Weather Condition Reporting
Example 13 — Traffic Condition Reporting
Example 14 — Collision Type Reporting
Example 15 — Collision Property Damage
Example 16 — Evacuation Type Reporting
Example 17 — Fire Details
Example 18 — Incident Type Reporting
Example 19 — Incident Location
Example 20 — Latitude and Longitude
Example 21 — Incident Categorization
Example 22 — Weather Condition Reporting
Example 23 — Traffic Condition Reporting
Example 24 — Vehicle Involved Type and Manufacturer
Example 25 — Collision Impact Type Reporting
Example 26 — Reporting Collision With
Example 27 — Collision Property Damage
Example 28 — Evacuation Type Reporting
Example 29 — Fire Details
Example 30 — Incident Type Reporting
Example 31 — Incident Location
Example 32 — Latitude and Longitude
Example 33 — Weather Condition Reporting
Example 34 — Vehicle Involved Type and Description
Example 35 — Collision Impact Type Reporting
Example 36 — Reporting Collision With
Example 37 — Evacuation Type Reporting
Example 38 — Fire Details
Example 39 — Incident Type Reporting
Example 40 — Incident Location
Example 41 — Fire Reporting
Example 42 — Not Otherwise Classified Reporting
Example 43 — Part I Offenses
Example 44 — Arson Reporting
Example 45 — Part II Offenses
Example 46 — Fare Evasion Reporting
Example 47 — Suicide Reporting
Example 48 — Safety and Security Chief Executive Officer (CEO) Certification — Suggested Format

List of Exhibits

Exhibit 1 — Calendar Year 2007 Safety and Security Reporting Changes and Highlights
Exhibit 2 — Summary of NTD Safety and Security Reporting Requirements
Exhibit 3 — NTD Safety and Security Reporting Timelines
Exhibit 4 — Reporting Thresholds for Safety and Security Incidents
Exhibit 5 — NTD Contact Information
Exhibit 6 — Reference Documents
Exhibit 7 — Reporting Thresholds for Non-Major Safety and Security Incidents

Viewing the 2007 Safety and Security Reporting Manual in PDF Format
Each module of the manual is presented as an Adobe Portable Document Format (PDF) file. To view these PDF files you must first have Adobe Acrobat Reader 5.0 or higher installed on your computer. If you do not have the Adobe software installed, you can go to Adobe's website and download the latest version of the software for your operating system (for free) directly from the Adobe website.

Downloading Instructions
Please download to your desktop or network drive prior to printing If viewing an open file, click on File > Save As... and save to your desktop or hard drive.

Printing Instructions
After downloading, to print an open file, click the Print button or choose File > Print. Specify the printer, page range, number of copies, and other options, and click OK. Most of the options are the same as they are for other applications.

2007 Safety and Security Reporting Manual
.pdf     Table of Contents
.pdf     Introduction
.pdf     Internet Reporting
.pdf     Safety and Security Setup form (S&S-10)
.pdf     Security Configuration form (S&S-30)
.pdf     Major Incident Reporting form (S&S-40)
.pdf     Non-Major Summary Report form (S&S-50)
.pdf     Safety and Security CEO Certification

.pdf     Glossary of NTD Terms

Acrobat Reader is required to view the PDF files.
Click to download.